Sunday, December 17, 2017

New Pulling Game

Take control of your modified truck or tractor in the world's heaviest motorsport competition!

Pulling USA 2 gives you the experience of truck and tractor pulling anywhere you go with multiple classes and vehicles. Upgrade your vehicle's engine, supercharger/turbocharger, fuel system and more with the easy to use garage system. Compete across multiple tracks and arenas with different track and weather setups.

Adjust the weights and tire pressure to accommodate the range of track conditions before controlling the throttle and clutch to get your arena shaking machine down the track. Build your RPM, engine temp and boost so you can take off with realistic dirt and smoke effects!
Enjoy a multitude of camera angles and tilt your device to steer in-bounds. Watch out for blown engines!
Start your career with either a Work Stock truck or Super Farm tractor as you earn points and cash to unlock more vehicles and tracks.
Challenge your friends to beat your pull score with a challenge and ranking system.

Features include:
- Realistic trucks and tractors with multiple engine types
- Setup weights and tire pressure depending on track conditions
- Change your graphic quality to match device and best visuals
- Easy to use upgrade system
- Challenge system 
- Multiple vehicles and classes
- Multitude of cameras to expand your gameplay
- Multiple track/arena types
- Tilt steering

Get it on:

Google Play



Friday, December 15, 2017

Q & A with Stephan Thomaes

Stephan Thomaes, 23 years old from Biervliet in the Netherlands. Stephan is the grandson of Ko de Regt and the nephew of Green Spirit Pulling Team owner Peter de Regt. He´s a Team member of the Green Spirit Pulling Team and the driver of the Rolls Royce Griffon V12 powered Light Mod Tractor called ,,Green Spirit 7´´. What are you doing in your normal life?
Stephan Thomaes: Designer at 'De Regt' Conveyor Systems and follow school for one day in the week at Avans Breda. What do you like to do in your free time, except Tractor Pulling?
Stephan Thomaes: Helping my father on the Farm. What do you like about Tractor Pulling?
Stephan Thomaes: To get a lot of power out of the Griffons! and the amazing weekends with the Team and Pulling friends. What was your first Tractor Pulling event?
Stephan Thomaes: I have no idea, i visit the events since i can walk. What is your favourite Event / Pulling track?
Stephan Thomaes: NTTO Grand National: Lochem (NL) / Made (NL) and in the Euro Cup Great Eccleston (GB). When and where do you have driven a Pulling Tractor for the first time?
Stephan Thomaes: It was in Stroe (NL) 2013 with the Green Spirit 7. What was your biggest success?
Stephan Thomaes: Great Eccleston (GB) 2017, our intention was to take the 3rd place in the Euro Cup, we took the 3rd place and won with the Green Spirit 8 the final Euro Cup round of 2017. So we ended up in 3rd and 4th in the 2017 Euro Cup. Which Pulling classes do you like too?
Stephan Thomaes: Unlimiteds and Super Stocks. What was your biggest disappointment?
Stephan Thomaes: The big crash in Stroe (NL) 2015 after the winning pull in Brande (DK), the engine was completely broken.. Which things must be change in the future of the Tractor Pulling sport?
Stephan Thomaes: 2 Modified classes instead of 3 Modified classes. What are your plans for the future in Tractor Pulling?
Stephan Thomaes: ??? bringing the twin Griffon back on the track??? What was for you the most important moment in the sport?
Stephan Thomaes: Driving the twin Griffon for the first time! amazing feeling. What was your favourite Pulling Tractor project in the workshop during a winter?  
Stephan Thomaes: Every winter is special again, make your tractor better and trying to improve the results of last year. Something you want to say?
Stephan Thomaes: Good luck to everybody and see you back next year! Thank you for your time and good luck for the future ! 

Thursday, December 14, 2017

The new Koljatti 3

The Karhukopla Pulling Team from Finland have built a new 4.5t / 9900lbs. Farm Stock Tractor during the winter of 2016 / 2017.
The new Farm Stock received a homemade Domex 650 wedge frame with a homemade chrome-moly Rollcage and a Ford TW25 rearend. The new Ford 9000 aluminium hood on the Tractor is homemade. The fenders are orginal John Deere fenders. The Ford TW 25 rear axle has a Stock TW 25 differential with special built gears, a special made ring and pinion gear, special built shafts and Ford TW25 stock planetary carrier housing and planetaries. Also the gearbox housing is original of a Ford TW25 and has 2 forward and 1 reverse gear. The gears and the shafts in the gearbox are special manufactured. All the gears and shafts were built by Kaarlo Finnilä from Finland. The Ford bell housing received a homemade steel liner and Christer Örn of Eagle clutches from Finland have built the 11" inch centrifugal clutch with 4 discs. The clutch also got a homemade steel fly wheel. The Finnish Team bought for their newly rebuilt Farm Stock a set of polished aluminium rims with new cut 24.5x32" Firestone Puller 2000 HP tires.
The new Ford 9000 Tractor is powered by a 6 cylinder New Holland Powerstar power plant on diesel fuel. The power plant has a modified New Holland engine block with homemade sleeves, a revised New Holland Powerstar cylinderhead (dry head) with a billet camshaft from Jan Burgraaf (New Generation Pulling Team), 56mm intake and 51mm exhaust valves, new stronger valve springs, a original Powerstar crank, special made steel rods and billet pistons, a selfmade intake and exhaust manifold, a Holset HX82 turbocharger, a aluminium Intercooler, a Basic data logger from the Netherlands, a Sigma fuel injection pump with 17mm elements and RSV regulator by Dikkenberg from the Netherlands.
The special made rods for the engine were built by Antti Jyräkoski from Finland.
The company Kunimek in Finland have built the billet pistons for the New Holland engine. The first season with the newly rebuilt Tractor was pretty successful for the Team. Driver Harri Laitamäki, together with his brother Jukka Laitamäki (owner of the Tractor), won the Finnish Championship and finished on a good 5th place at the 2017 European Championships in Stroe, the Netherlands.

Starlight Express Light Mod Edition

After almost 10 years in Heavy Modified Pulling with 3 Allison V12 aircraft engines, the Starlight Express Pulling Team from Parma in Italy made the switch into the 2.5t/5500lbs. Light Modified division this season. The Italians ran for 3 years with 3 turbocharged Allison V12 engines in the Heavy Modified class in Italy. The Starlight Express Team had success with 3 turbocharged engines, but also sometimes bad luck and technical problems with the right settings of the engines. After the 2016 season with a lots of problems and less time to get all 3 Allisons in good shape, the crew decided to make the switch into the Light Modified class with a single tubocharged Allison on the frame.
For the switch they took over the old Starlight Express 3 chrome-moly tube frame with the homemade cage and the completely Rockwell rearend. The tube frame was modified for 1 engine,  received some new engine brackets and a fresh paintjob. Also the homemade aluminium fenders and the Midwest aluminium rims with the Firestone Puller 2000HP tires were took over of the old one. Also, the fenders got a new look during the season. The Rockwell rear axle in the Light Mod has a SQHD aluminium center section, a homemade aluminium differential with gears from the Green Monster Pulling Team from Germany, a Rockwell ring and pinion gear and aluminium planetaries carrier housing with Franklin planetaries.
The Tractor also needed some new lighter parts in the drivetrain for the the switch. The ride got a new homemade reverser with a homemade steel housing, a new homemade driveline and a 4 disc Molinari centrifugal clutch with a Browell aluminium bell housing.
The Starlight Express Light Mod is powered by a turbocharged Allison V1710 V12 engine on methanol fuel. The Allison engine comes from the old triple Allison Mod and was improved. The Allison power plant has a original Allison block with sleeves from the Green Monster Pulling Team, a original Allison crank with stock rods and Arias aluminium pistons, revised cylinder heads with Allison cams and a homemade belt drive, a new homemade intake and exhaust manifold, 2 Garret T18 turbochargers from the Dutch Popeye Pulling Team, a Hillborn fuel system with a Hillborn PG 250 fuel pump, a selfmade stain less steel fuel tank, a MSD 8 ignition and a AIM MXL Pro data logger.
The new Light Mod made its maiden voyage at the Italian Championship finals in Jolanda di Savoia in August. The Tractor made a good start, but after 20m the engine had a backfire and a little fire, driver Romano Mozzioni went from the thorttle and stopped the Tractor. Back in the workshop they found no major damage on the engine, only a broken thorttle wire and a little fuel leakage. Also after the the first run in front of the Sledge, they changed the Mallory ignition against the MSD 8 ignition.
The Starlight Express Team will compete with their Strlight Express Light Mod in the Italian Championship next year.

for further information, check here:

or check here:

NTTO Schedule 2018

check here:

PPL 2017: 2wd Trucks pulling at the Spring Nationals in WIlmington, OH

Friday, December 08, 2017

Q & A with Jannis Rüter

Jannis Rüter, 20 years old from Füchtorf in Germany. Jannis is a crew member of the Green Monster Pulling Team. Since 2016, He´s one of the driver of the Mod Tractor called ,,Green Monster Stage 4´´. He finished the last 2 years in runner up position for the GM Team in the German Championship of the 2.5t/5500lbs. Light Mod class. What are you doing in your normal life?
Jannis Rüter: Industrial mechanic at the company Claas in Harsewinkel. What do you like to do in your free time, except Tractor Pulling?
Jannis Rüter: Quad driving, Tractor driving on a farm and rural youth. What do you like about Tractor Pulling?
Jannis Rüter: The engines, the people, cohesion and the challenge. What was your first Tractor Pulling event?
Jannis Rüter: Tractor Pulling Füchtorf (D) 2001. What is your favourite Event / Pulling track?
Jannis Rüter: My favorite Pulling Event is my home pull in Füchtorf (D). My favorite track is Haßmoor (D). When and where do you have driven a Pulling Tractor for the first time?
Jannis Rüter: In Haßmoor 2016 with the old Green Monster in the 2.5t/5500lbs. Light Mod class (3rd Place finish). What was your biggest success?
Jannis Rüter: The victory in Haßmoor (D) and Edewecht (D) 2017. Which Pulling classes do you like too?
Jannis Rüter: Mini Modified, Light Modified, Modified, Heavy Modified and Super Stock. What was your biggest disapointment?
Jannis Rüter: broken sensor on Green Monster Stage 4 at the 2017 EC in Stroe (NL). Which things must be change in the future of the Tractor Pulling sport?
Jannis Rüter: More notoriety and TV appearances. What are your plans for the future in Tractor Pulling?
Jannis Rüter: Getting better and win more often. What was for you the most important moment in the sport?
Jannis Rüter: European Champion 2016 in the 3.5t/7700lbs. class with the Green Monster Stage 4. What was your favourite Pulling Tractor project in the workshop during a winter?  
Jannis Rüter: Overhaul and redesign the Green Monster Stage 4 after the 2016 European Championship title. Something you want to say?
Jannis Rüter: Thank you to all who make it such a great hobby ! Thank you for your time and good luck for the future ! 

Thursday, December 07, 2017

First Light Super Stock in Denmark

After 4 years Farm Stock Pulling in Denmark, the Stumper & Stykker Pulling Team around Chresten Christensen and Michael Simonsen from Vorning in Viborg, made the switch into Light Super Stock Pulling this season. In February 2014, they bought the old Zeinstra Welldone Deere (formerly Bits n´ Pieces of Willem Veldhuizen) of the Zeinstra Pulling Team from the Netherlands without the engine and drove that John Deere Tractor for 3 years in the Farm Stock competition in Denmark. In the winter of 2016 / 2017 Chresten and Micheal decieded to built a new engine on alcohol for the Tractor. The Light Super Stock got a turbocharged 6 cylinder John Deere engine with 7.6 l capacity. The engine has a JD stock block with new sleeves, a revised 55 Series JD cylinderhead with a camshaft from Jan Burggraf (New Generation Pulling Team) in the Netherlands, a counterweighted JD stock crank from the Neighbours Nightmare Pulling Team, special hardened rods from the USA and original JD pistons, a homemade intake and exhaust manifold, a Holset HX 82 turbocharger with 4.1" inch intake wheel, a Veldhuizen Special Product
(VSP) injection fuel system, a VSP fuel pump and homemade fuel tank. The new John Deere engine was built by Chresten Christensen and Michael Simonsen, together with the help of the Hvilsom Pulling Team (Elkaer Metal Boy Light Mod) from Hobro in Denmark. The Hvilsom Pulling Team helped also them to find the right setting for the engine. The Stumper & Stykker Pulling Team learned a lot of new things and made some nice passes in Denmark during the season of 2017, but also had some damages, like the blown intake manifold at the Danish Championship finals in Brande.
But this week, before the report went online on the pullingworld website, I´ve got a very sad and shocking message from Michael Simonsen. They had a fire in their workshop in Viborg 4 weeks ago. The result was, the completely workshop with the Light Super Stock Tractor burned down. The John Deere Tractor was in the fire completely destroyed and is not anymore to rescue. It´s a hard setback for the Danish Team after all those investments during the last winter. We hope the guys find the force and the money to built a new Pulling Tractor in the future !!!!
Workshop and the Tractor after the fire

New 600kg Modified Garden Puller of the Green Scare Team

From Ostbevern in Germany, the Green Scare Pulling Team are currently building on a new 600kg Modified Garden Puller Tractor for the 2018 season. Mathias Tewes started with the new project in Semptember of 2016. The new Tractor receive a new homemade 2mm steel wedge frame with a homemade ROP, a selfmade steering and a GM (General Motors) rearend.
The GM rear axle was shorted and received a GM differential with modified gears, a original center section and increased half shafts with modified gears. The gearbox of the Garden Puller comes out of an old Volvo Amazon car and has a rebuilt input and output shaft. The new ride also gets a homemade driveline with a self built steel driveline protection, a 3 disc Tilton centrifugal clutch with a size of 7.25´´ inch and a homemade steel bell housing. The new homemade fenders were made from aluminium. The German Team purchased for their new project a set of new polished Real Wheel rims with Cepek Giant Puller tires from the USA.
The new 600kg Modified will powered by a turbocharged 6 cylinder VW VR6 engine with 2.8l capacity on methanol. The new power plant has a VR6 engine block with orginal sleeves, a stock crackshaft with original
VR6 rods and pistons, a revised VW VR6 cylinder head with stock camshafts, a homemade intake and exhaust manifold, a Garret GT35 turbocharger with a homemade air intake funnel and a selfmade steel turbo protection, a stock oil pump, a homemade fuel tank with a FueLab 530 fuel pump and a KDFI control module.
The Green Scare Pulling Team will compete with their new Tractor in the German Championship next year. The maiden run of the new 600kg Modified Garden Puller is currently planned for the 14th of April 2018 in Holzheim, Germany.

for further information, check here: